Quick answer: For school banners that hang outside, print on a weather-resistant material: 15-mil vinyl scrim for tear-resistant spirit, athletic and event banners, or outdoor polypropylene for field, fence and sideline signs. Indoor coated or bond paper is not made for sun, wind and rain. In the Education Graphics lineup, the Z6 is the poster printer that prints 15-mil vinyl scrim, in 24″ or 44″ widths.
What material is best for outdoor school banners?
| Material | Best for | Notes |
|---|---|---|
| 15-mil vinyl scrim | Spirit banners, athletic banners, entrance and event banners | Tear- and weather-resistant. Printed on the Z6. |
| Outdoor polypropylene (poly) | Field, fence, sideline, carnival and sports-day signs | Weather-resistant synthetic stock, 24″ and 36″ × 150 ft rolls. |
| Adhesive-backed poly | Peel-and-stick wall graphics, floor decals, wayfinding | Mostly indoor; goes up without tape or frames. |
| Coated or bond paper | Indoor posters and indoor banners | Not for outdoor use. |
See the outdoor and adhesive poly rolls and our guide to which paper posters are printed on.
What size should an outdoor school banner be?
Width is set by the printer’s roll; length is limited only by the roll. A 24″ printer prints banners up to 24 inches tall at any length, and a 44″ Z6 prints up to 44 inches. Common school banner sizes:
- Hallway or spirit week: 24×96 in
- Gym, pep rally or field: 36×120 in or larger
- Graduation backdrop: multi-panel 36-inch strips
For reading distance, plan about 1 inch of letter height for every 10 feet. A banner read from a parking lot 50 feet away needs letters about 5 inches tall. More sizes are in the school poster sizes guide.
Can any poster printer print outdoor banners?
Any roll-fed poster printer can print a long indoor banner on paper. Outdoor banners need a printer and ink that work with outdoor media. The Z6 uses a 6-ink pigment system and prints water- and fade-resistant output for indoor and outdoor use on matte, gloss, vinyl, 15-mil vinyl scrim and banner stock. It is the only Education Graphics model that prints 15-mil vinyl scrim. Compare it with the other models on the poster printer models page.
How do you design a banner that reads from far away?
- Use one short headline: the event, team or message, plus a date if it matters.
- Use high-contrast school colors and a bold, simple font.
- Leave margins at the edges for hanging hardware.
- Design at the final size and use images at about 100–150 ppi at that size.
- Export a PDF and send it to the printer.
How do you hang an outdoor banner safely?
Most outdoor banners are hung by their edges with grommets and zip ties or bungee cords on a fence, railing or frame. Keep the banner tight so wind does not whip it, and take it down before severe weather. Follow your district’s facilities rules for fences, buildings and fields.
Outdoor banner FAQ
What is vinyl scrim?
Vinyl scrim is a banner material with a woven mesh layer inside the vinyl, which makes it tear-resistant. A 15-mil scrim is a common weight for outdoor school banners, and the Z6 prints it in 24″ or 44″ widths.
Can you use poster paper for an outdoor banner?
No. Indoor coated or bond paper is not made for weather. For outside use, choose 15-mil vinyl scrim for banners or outdoor polypropylene for field and fence signs.
How wide can a school print an outdoor banner?
The banner’s height is limited by the printer’s roll width and its length by the roll. The Z6 comes in 24″ and 44″ widths, so it prints outdoor banners up to 24 or 44 inches tall.
What is the difference between outdoor poly and vinyl scrim?
Outdoor polypropylene is a weather-resistant synthetic stock for field, fence and sideline signs. Vinyl scrim is a reinforced banner material made to resist tearing, which suits banners that hang in wind.
Can a school buy an outdoor banner printer with a purchase order?
Yes. Education Graphic Solutions accepts school purchase orders with no prepayment, the Z6 is Title I eligible and on TIPS contract #240804, and it is priced by quote. Call 1-877-891-8411.