Quick answer: This glossary explains the terms you will see when you buy, set up or run a wide-format poster printer at school, from roll width, DPI and pigment ink to coated paper, vinyl scrim and cold lamination. Each entry is one or two plain sentences, with a link to the page that covers the topic in full.
Printer and print terms
- Poster printer
- A wide-format printer that prints from a paper roll, so a full-size poster or banner comes out in one piece. See poster printer models compared.
- Wide-format (large-format) printer
- Any printer that prints wider than a standard office printer, usually from 24 inches up. Poster printers are wide-format printers.
- Roll width
- The widest print a machine can make, such as 24″, 36″ or 44″. Length is limited only by the roll, which is why a 24″ printer can print long banners.
- Roll-fed
- Paper feeds from a continuous roll instead of cut sheets.
- D-size
- The common name for a 24×36 inch print, the standard school poster size.
- DPI (dots per inch)
- How finely a printer places ink. Higher DPI gives sharper text and photos. The Z6, for example, prints up to 2400 × 1200 optimized dpi.
- PPI (pixels per inch)
- The resolution of your image file at its final size. For posters, aim for about 100–150 ppi, which is about 2400×3600 to 3600×5400 pixels for a 24×36 poster.
- Pigment ink
- Ink made of fine colored particles. Pigment inks resist water and fading, which is why outdoor printers such as the Z6 use them.
- Printhead
- The part that fires ink onto the paper. Clogged nozzles cause streaks.
- Banding
- Repeating light or dark horizontal lines across a print, usually fixed with a printhead clean or a paper advance calibration. See poster printer troubleshooting.
- Paper advance calibration
- A maintenance routine that adjusts how far the paper moves between passes, which removes most remaining banding.
- Tiling
- Splitting one large poster across several letter-size sheets that you trim and tape together, the workaround when you do not have a wide-format printer.
- PDF Print
- Canva’s high-quality PDF export, the usual file to send to a poster printer.
Paper and media terms
- Bond paper
- Uncoated everyday paper for drafts, line drawings and low-cost posters.
- Coated paper
- Paper with a coating that keeps ink on the surface for brighter color; the everyday choice for most school posters.
- Matte
- A low-glare finish that suits text-heavy posters under bright lights.
- Gloss and satin
- Shinier photo finishes for picture-led posters; satin has less glare than gloss.
- Outdoor polypropylene (poly)
- A weather-resistant synthetic stock for field, fence and sideline signs.
- Adhesive-backed poly
- Poly with a peel-and-stick back for wall graphics, floor decals and wayfinding.
- Vinyl scrim
- A tear-resistant banner material with a mesh layer inside the vinyl; 15-mil scrim is used for outdoor banners.
- Mil
- A thousandth of an inch, used for the thickness of laminate film and banner material.
More detail: what paper posters are printed on.
Finishing terms
- Cold lamination
- Lamination with pressure-sensitive film and no heat; the safer choice for inkjet posters and photos.
- Hot (thermal) lamination
- Lamination with heated rollers that melt adhesive film; suits high volumes of everyday paper.
- Mounting
- Fixing a print to a rigid board, such as foam board, for long-term display.
Compare both methods in cold vs hot lamination.
Buying terms
- Package
- A poster printer sold with software, templates, ink, paper and support. See what each package includes.
- Purchase order (PO)
- A school or district’s written order to buy; most K-12 purchases are made this way.
- Cooperative contract (TIPS)
- A contract that lets member schools buy without running a separate bid. Education Graphic Solutions is on TIPS contract #240804.
- Supplement, not supplant
- The federal rule that Title I money must add to, not replace, state and local funds. Your Title I coordinator decides what is allowable.
Poster printer glossary FAQ
What does DPI mean in printing?
DPI means dots per inch, how finely a printer places ink on the page. Higher DPI gives sharper text and photos. It is different from PPI, which describes the resolution of your image file.
What is the difference between DPI and PPI?
DPI describes the printer’s output; PPI describes the image file. For a poster, prepare the file at about 100–150 ppi at the final size and let the printer’s DPI handle the rest.
What does roll width mean?
Roll width is the widest print a roll-fed printer can make, such as 24, 36 or 44 inches. The length of a print is limited only by the roll, so banners can be much longer than they are wide.
What is D-size paper?
D-size is the common name for a 24×36 inch sheet, the standard school poster size for hallways, events and main classroom charts.
What does mil mean for laminate and banners?
A mil is one thousandth of an inch. It describes the thickness of laminate film or banner material; a higher number means a thicker, stiffer material, such as 15-mil vinyl scrim for outdoor banners.